Have Questions? Contact us by Phone or Email!
              Phone number: 888-476-3701
              Email: info@ziplinegear.com 
Follow

Breaking Strengths and Safe Working Loads

Strength ratings on rigging or safety equipment are typically given as either a Minimum Breaking Strength (MBS) or Safe Working Load (SWL). Occasionally you will also see WLL (Working Load Limit), but that’s basically the same thing as a SWL. The ratings mean different things and can be confusing, so here’s the inside info.

Minimum Breaking Strength: This one is pretty self-explanatory; it’s the minimum amount of weight you would have to have on the product to make it fail completely. These ratings are assigned conservatively; we recently pull tested a handful of our lanyards that have a 7,000lbs break strength rating, and none of them broke with less than 8,500lbs.

Safe Working Load: This refers to the max amount of weight you could put on a piece of equipment day-in, day-out without damaging it. Depending on the type of material and what it’s used for, this figure is usually 1/3 or 1/5 of the breaking strength. So if you see a 3500lb SWL lanyard and you’re concerned that it doesn’t meet the 5000lb MBS requirement for commercial applications, don’t sweat it! That lanyard is sure to have a breaking strength of at least 10,500lbs.

One last note: Many ratings on safety gear are expressed as kilonewtons instead of pounds. A kilonewton (kN) is roughly the equivalent of 225lbs, so when you see a 22kN rating on a zip line carabiner, just imagine 22 burly dudes hanging from the carabiner before it snaps. That’s about 4,950lbs.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.